Skip to content

Joyor Electric Scooter

JOYOR ELECTRIC SCOOTERS

USER MANUAL

JOYOR ELECTRIC SCOOTERS

USER MANUAL

1. MAIN PARTS

Joyor Electric Scooter F-Series

  1. Joyor electric scooter Spain patinete electrico Joyor España Modelo X1 ModelLCD display
  2. Lever lock for handlebar height adjustment
  3. Handlebar folding sleeve
  4. Brake wire
  5. Front suspension
  6. Front light
  7. Front mudguard
  8. Folding system
  9. Rear light
  10. Parking stand
  11. Brake handle
  12. Front air tyre
  13. Rear solid tyre
  14. Rear mudguard
  15. Rear drum brake

Joyor Electric Scooter X-Series

  1. Joyor electric scooter Spain patinete electrico Joyor España Serie X Series Modelos X1/X5S ModelsLCD display
  2. Lever lock for handlebar height adjustment
  3. Handlebar folding sleeve
  4. Brake wire
  5. Front suspension
  6. Front light
  7. Front mudguard
  8. Folding system
  9. Rear light
  10. Parking stand
  11. Brake handle
  12. Front air tyre 
  13. Rear air tyre
  14. Rear mudguard
  15. Rear disk brake

Joyor Electric Scooter Y-Series

  1. Joyor electric scooter Spain patinete electrico Joyor España Serie Y Series Modelo Y5S/Y10 ModelLCD display
  2. Lever lock for handlebar height adjustment
  3. Handlebar folding sleeve
  4. Brake wire
  5. Double front suspension
  6. Front light
  7. Front mudguard
  8. Folding system
  9. Rear light
  10. Parking stand
  11. Brake handle
  12. Front air tyre 
  13. Rear air tyre
  14. Double rear suspension
  15. Rear mudguard
  16. Front turning signal
  17. Rear turning signal
  18. Front and rear disk brake

Joyor Electric Scooter G-Series

  1. LCD display
  2. Lever lock for handlebar height adjustmentJoyor electric scooter Spain patinete electrico Joyor España Serie G Series modelo model G1
  3. Handlebar folding sleeve
  4. Brake wire
  5. Double front suspension
  6. Front mudguard
  7. Folding system
  8. Rear light
  9. Parking stand
  10. Brake handle
  11. Solid front tyre
  12. Rear solid tyre
  13. Double rear suspension
  14. Rear mudguard
  15. Front disk brake
  16. Rear drum brake

Joyor Electric Scooter S-Serie

  1. LCD display

  2. Lever lock for handlebar height adjustment

  3. Handlebar sleeve

  4. Brake wire

  5. Brake handle

  6. Front suspension

  7. Front light

  8. Front mudguard

  9. Front air tyre

  10. Front disc brake (hydraulic on S10-S)

  11. Front motor (only S10-S)

  12. Folding system

  13. Rear light

  14. Side lights

  15. Parking stand

  16. Rear motor

  17. Rear air tyre

  18. Rear mudguard

  19. Rear disk brake (hydraulic on S10-S)

  20. Rear suspension

2. TECHNICAL SPECIFICATIONS

The vibration value exposed to the hand-arm system is 2.5 m/s2.

Measurement uncertainty, 0.5 m/s2. The vibration can be altered due to the rough terrain where the scooter is circulatd. However, this alteration will not depend on the scooter.

The A-weighted emission sound pressure level is 35 db (A)

The electric scooter does not have the possibility of remote control. It is not necessary to use any additional means to prevent unauthorized use for safety measures because this machine is not considered a dangerous industrial machine but a vehicle for individual transport for public use.

From the driver’s position, the driver can operate all the drive components necessary for the operation of the machine: brake, display with accelerator, handlebar, light switch, bell.

The displacement of the electric scooter with driver on board can only be implemented if the driver is at his command post, is prepared and only if the speed of the electric scooter is greater than 0 km/h, being started mechanically by pushing the scooter forward and applying the electric throttle only afterwards.

3. SAFETY INSTRUCTIONS

  • Joyor electric scooter is a personal transportation vehicle and is designed for one person only. Please do not transport a passenger on this electric scooter.

  • Joyor electric scooter is designed for adults only. People under the age of 16 cannot use this vehicle. Children should not use the vehicle or play with it.

  • Please wear a safety helmet when riding the electric scooter.

  • The vehicle cannot be used in unauthorized spaces and the user has to comply with the current local norms and regulations of the circulation of the personal mobility vehicles

  • Do not ride the electric scooter on the unsafe surface.

  • Please practice on an open traffic-free space on gear level 1 before riding on the bicycle lane.

  • Please during the riding operations always keep both hands on the handlebar and both feet on the standing board. Please do not jump on the standing board.

  • Do not turn off the motor power while riding the scooter.

  • Donottrytorideoveragapofmorethan3cm.Thismay cause injury to the rider or damage the vehicle.

  • When riding on the rough or bumpy road, please slow down the electric scooter or stop riding the vehicle.

  • A user must adjust the height of the handlebar tube according to their height to ensure a safe, stable and comfortable ride.

  • Do not ride Joyor electric scooter on slippery surfaces such as oil or ice.

  • DonotuseJoyorelectricscooterintheweatherconditions with the temperature below -5.

  • Do not leave the product immersed in a water depth of more than 3 cm to avoid damage to the electrical parts of the vehicle. Do not store the vehicle in a place with high humidity levels.

  • Avoid riding the Joyor electric scooter in adverse weather conditions like rain, snow or wind storm to prevent an accident. If riding in these conditions, never exceed the speed of 10 km/h.

  • If the electric scooter is not used for a period of longer than 30 days, regularly charge it at least every 30 days. The charging port must be kept clean and dry at all times.

  • Whenunfoldingthevehicle,pleasepressthefoldingsystem handle till it clicks and make sure that it is in place.

  • Whencharging,alwaysensurethatsomebodyissupervising the charging site. If the charger temperature increases too much, stop the charging process.

  • Always only use the original charger that corresponds to your scooter’s model.

  • Please keep all plastic bags of the packaging of the product away from children to avoid suffocation.

Instructions regarding installation and assembly, aimed at reducing noise and vibrations:

Before using the equipment, tighten all the fastening screws of the screen with the accelerator and the brake lever, making sure that these components are fixed and do not move, to avoid vibrations.

To prevent the handlebar vibrations and shaking adjust and, if necessary, loosen the screws inside the handlebar sleeves when folded.

Before using the equipment, make sure that there are no loose cables on the rear wheel and motor part, to avoid high noise from the motor.

Every 2 months it is recommended to check and tighten the nuts on the rear wheel of the motor, to avoid vibrations and high noise from the motor.

4. OPERATIONAL INSTRUCTIONS

instructions first assembling electric scooter

Instructions Folding electric scooter

Joyor electric scooter Spain patinete electrico Joyor España folding plegable

  1. On/Off SwitchJoyor electric scooter Spain patinete electrico Joyor España Display & Parameter Settings Configuración Ajustes Parámetros
  2. Gear switch
  3. Acceleration handle
  4. Gear indicator
  5. Speed indicator
  6. Multi-indication area/mileage indicator
  7. Battery charge level indicator
  8. USB charging port
 
Buttons

— Long press the ON/OFF button to turn on the display, and short press the ON/OFF to switch between ODO, TRIP, V, A, E, TM in the multi-indicator

— Long press the ON/OFF to turn off the display

— Long press the M and ON/OFF at the same time to enter into the parameter settings mode. Short press the ON/OFF button to switch between parameters. Short press M to change the settings. Long press the M and ON/OFF at the same time to save and exit.

— Long press M to turn on the lights

 
Display Functions

Speed indication, power indication, error code indication, lights control, cruise control, gear level switch and gear indicator, total mileage, single mileage, real-time voltage, running time, acceleration control.

 
Multi-indicator Area     

Total mileage “ODO”, single mileage “TRIP”, real-time voltage “V”, running time “TIME”, error code “E”. When the symbol “!” is flashing, short press ON / OFF switch button to enter into the error analysis mode. Each number of the error code corresponds to a specific problem, as follows:

 

ERRO 1: Motor fault

ERRO 2: Throttle fault

ERRO 3: Controller fault

ERRO 4: Brake lever power off

ERRO 5: Undervoltage protection

ERRO 6: Communication fault, the display unable to get the output from the controller

ERRO 7: Communication fault, the controller unable to get the output from the display

 
Speed Indicator

Unit: MPH, KM/H. A speed signal comes from the motor via controller to the display. The indicated speed depends on the motor signal and the wheel diameter.

 
Gear Switch

Short press the MODE button to switch the gear: 1 – slow, 2 – medium, 3 – fast. The higher the gear, the faster the speed. Gear 0 means the motor is not powered.

 
Lights Control

Long press the MODE key to switch on/off the front and rear lights. Rear lights are also lit automatically when braking.

 
Cruise Control Function

When riding the scooter, keep the acceleration handle pressed with the same pressure for 5 seconds to activate the cruise control mode. Use the brake handle to deactivate the cruise control mode.

 
Start mode selection

For safety purposes, all Joyor models except Mbike model are set by default to non-zero start mode, which means the motor will not get started until you start to kick the scooter first so that the speed is above zero:

NON – Non-zero start mode

ZERO – zero start mode

 
USB Charging Indicator

The display is equipped with a USB port for you to be able to charge your electronic devices. When the device is connected, the USB indicator is lit. In case of problem, the indicator starts to flash, and a safety mode will be automatically activated.

 
Parameter Settings

Long press the M and ON/OFF at the same time to enter into the parameter settings mode. Short press the ON/OFF button to switch between parameters. Short press M to change the settings. Long press the M and ON/OFF at the same time to save and exit.

 

— P01: rear light brightness: 1 – the darkest, 3 – the lightest;

— P02: mileage unit, 0: km; 1: mile;

— P04: sleep mode time: 0 – no sleep mode; 1-60 – sleep mode, minutes;

— P06: wheel diameter: unit – inch; precision: 0.1;

— P07: number of measuring magnets: range 1-100;

— P09: zero start, non-zero start setting: 0 – zero start; 1 – non-zero start;

— P12: starting torque: range 0-5, 0 – the weakest, 5 – strongest;

— P15: motor drive signal percentage settings: (connected to PO8 speed limit function) full speed is set to 100

— P16: cruise control function: 1 – activated, 0 – deactivated

— P17: light settings: the lights are not lit automatically when the vehicle is on, 0 – the lights are lit automatically when the vehicle is on

5. RIDING OPERATIONS INSTRUCTIONS

Before Riding

— Choose a suitable venue for riding the electric scooter.

— Unfold the electric scooter according to the instructions.

— Adjust the height of the handlebar tube of the electric scooter according to your height.

 

Riding

— Press the power button to turn on the power. The speed is set by default to gear level 1.

— For safety purposes, Joyor electric scooter has a safe start design, which means the motor can start only when the speed of the electric scooter is above 0. It prevents motor start when the acceleration handle is pressed by mistake. To start the riding operations, put one foot on the standing board of the electric scooter and the other foot on the ground and kick scoot it like a classic kick scooter. When the electric scooter is in motion and its speed is above 0, smoothly use the acceleration handle to start the motor. Once the motor starts, put the other foot on the standing board of the electric scooter and continue riding. 

— When riding the electric scooter, adjust the gear level from 1 to 3, use lights and horn according to the road conditions and according to the situation. 

— Be aware of the cruise control function. Cruise control function is activated when the acceleration handle is pressed with the same pressure for 3 seconds. 

— Be aware of the possibility of unpredictable sudden obstacles on your way and control the speed level.

 

Braking

— Use the rear brakes handle for braking under normal circumstances. Use front brake handle (for models series Y and M) for braking in emergency situations.

— The greater pressure you put, the greater braking force will be applied. Be aware that hard braking may result in an accident due to slipping of the wheels, lost of balance and fall of the electric scooter. Hard braking might also cause damage to the tyre.

Riding

— Press the power button to turn on the power. The speed is set by default to gear level 1.

— For safety purposes, Joyor electric scooter has a safe start design, which means the motor can start only when the speed of the electric scooter is above 0. It prevents motor start when the acceleration handle is pressed by mistake. To start the riding operations, put one foot on the standing board of the electric scooter and the other foot on the ground and kick scoot it like a classic kick scooter. When the electric scooter is in motion and its speed is above 0, smoothly use the acceleration handle to start the motor. Once the motor starts, put the other foot on the standing board of the electric scooter and continue riding. 

— When riding the electric scooter, adjust the gear level from 1 to 3, use lights and horn according to the road conditions and according to the situation. 

— Be aware of the cruise control function. Cruise control function is activated when the acceleration handle is pressed with the same pressure for 3 seconds. 

— Be aware of the possibility of unpredictable sudden obstacles on your way and control the speed level.

Braking

— Use the rear brakes handle for braking under normal circumstances. Use front brake handle (for models series Y and M) for braking in emergency situations.

— The greater pressure you put, the greater braking force will be applied. Be aware that hard braking may result in an accident due to slipping of the wheels, lost of balance and fall of the electric scooter. Hard braking might also cause damage to the tyre.

6. MAINTENANCE

Tyres

— Joyor electric scooter uses rubber elastic tyres. When the tyres are worn out or have a puncture, they need to be replaced timely.

— Contact the official distributor to replace the original tyres.

— Inspect your electric scooter and its tyres every month, to check if the screws are tightened enough. If they are loose, tighten them.

Battery

— Joyor electric scooter is equipped with a  ternary ion lithium battery.  The average lifespan of the battery is 1000 cycles. Under normal use and maintenance, the battery lifespan can generally reach more than 1000 cycles.

— Before using the electric scooter for the first time, please charge the battery to the full charge.

— Avoid totally depleting your electric scooter's battery before charging. Always make sure it is a minimum of 10 % charged. For satisfactory electric scooter performance, the battery has to be charged a minimum of 50 %

— Do not leave your electric scooter with a significantly discharged battery for a few hours. Charge it promptly.

— When storing the electric scooter for a long period, make sure the battery is at least 40-50 % charged. It is advisable to charge your scooter a minimum of once per 30 days.

— Always use only the original Joyor charger that corresponds to the model of the electric scooter.

— Do not leave your electric scooter in the cold temperature below 0 or under the direct sun. Keep the battery dry. Negative environmental conditions can damage the battery of the electric scooter.

— Ion lithium batteries have to be treated with extreme caution. Unappropriated charging, damage or overheating can result in a fire. Do not leave your electric scooter to charge without supervision. Do not leave the electric scooter to charge overnight. Always supervise the electric scooter while it is charging and avoid battery over-charge. Do not use, charge or leave a damaged battery unattended and follow the disposal protocols immediately.

Charger

The dedicated charger provided by Joyor Electric Scooter has a charging protection timing function.

 
Charging instructions

— Open the charging port cover on the electric scooter and insert the charger output connector into the charging port.

— Insert the charger input power plug into the power socket (AC110V-220V)

— The charger light is red to indicate that charging is in progress; when the charger light turns green, it indicates that the battery is fully charged.

— When charging the battery, place it in a dry, ventilated environment.

 

Joyor S series chargers: 54.6V (S5), 67.2V (S10-S)

-- 54.6V: Input 100-240V ~, 2.8A (MAX) 50 / 60Hz; Output 54.6V = 2.0A; Manufacturer - DONGGUAN ANGDI TECHNOLOGY CO., LTD.

-- 54.6V: Input 100-240V ~, 3A (MAX) 50 / 60Hz; Output 54.6V = 2.0A; Manufacturer – MFRS POWSUN ELECTRONIC CO., LTD.

-- 67.2V: Input 100-240V ~, 2.8A (MAX) 50 / 60Hz; Output 67.2V = 2.0A; Manufacturer - DONGGUAN ANGDI TECHNOLOGY CO., LTD.

  • Please check and adjust screws monthly. Under conditions of professional or intensive use, it is recommended to change the screws every 6 months.

  • Please frequently check and adjust the brakes.

 

Brake

Joyor electric scooter is equipped with a rear brake (or a rear and a front brake for series Y and M), if the brake pad is wearing out, please contact the distributor to fasten it or replace it.

 
Solutions for general problems

In case Joyor electric scooter does not work properly, please check if you have completed the actions below:

  1. The power is on
  2. The battery level on the screen
  3. All the sockets and connectors are connected correctly.

If you have completed all the above actions and the electric scooter is still not working properly, please contact the distributor.

7. DOWNLOADABLE INSTRUCTION MANUAL

You can download here the User Manual for the Joyor electric scooters F, X, Y, and G series.

You can download here the User Manual for the Joyor electric scooter H1.

You can download here the User Manual for the Joyor electric scooters A3 and A5.

8. WARRANTY POLICY

  • This limited warranty covers any defects in the new Joyor devices accompanied by this limited warranty statement for a period of 24 months after the first retail purchase for the electric parts (display, controller, motor and charger) against manufacturing defects on a replacement basis, and a 12 months or 2000km warranty for the battery (whichever comes first) under normal installation, use, service and maintenance.

  • Only consumers purchasing this device from an authorized Joyor retailer or reseller may obtain coverage under this limited warranty.

  • This warranty extends to the original purchaser only and is non-transferable.

This limited warranty does not cover any problem that is caused by:

Commercial use, accident, abuse, neglect, shock, heat or humidity beyond product specifications, improper installation, operation, maintenance or modification.

Any misuse contrary to the instructions in the User Manual.

Malfunctions caused by other equipment.

This limited warranty is void if a product is returned with removed, damaged or tampered labels of any alterations (including the unauthorized removal of any component or external cover).

Joyor does not cover the cost of national/international warranty shipping at any time.

This limited warranty is valid with the original receipt of purchase from the authorized dealer.

Excludes consumable wearing fittings.

Excludes parts with physical damages,incomplete/broken cable connections.

Excludes misuse, modification, negligence, and use of the scooter in wet conditions.

Excludes professional and hire use.

  • Joyor will not provide any warranty coverage unless your claim it in compliance with all terms of this limited warranty statement and you follow the proper return procedure.

  • To request warranty service, you may contact us or contact an authorized Joyor distributor.